Products‎ > ‎

Wireless Sensor Network

We provide TI 2530 based Zigbee modules with Command set firmware based on ZigBee Pro stack. Also provide project based integration of Zigbee + beaglebone service to perform a Internet Of Thing enviroment.

2 types of modules are provided:
GFZM-T5321 low power module                                              GFZM-T5310 high power module
Main chip: TI CC2530256KB Flash
Frequency: 2.4 GHz
Transmit Power: 4dBm(max)
Receiver sensitivity: -95 dBm(Norminal)
Data Rate: 250Kbps
Antenna Impedance: 50ohm
Package Size: 22.2*16.2*3.5(mm)

With built-in chip antenna, suitable for short range applicaiton(<15m).		 
Main chip: TI CC2530 + CC2591
Frequency: 2.4 GHz
Transmit Power: 20dBm(max)
Receiver sensitivity: -95 dBm(Norminal)
Data Rate: 250Kbps
Antenna Impedance: 50ohm
Package Size: 30.3*16.2*4(mm)
With U.FL connector to connect standard 2.4G external antenna, suitable for outdoor and long range application(<1.3km).


Command Set firmware
we provide following 3 major functions in this UART based firmware:

•Preset method of forming networking.
•Preset data flow direction.
•Networking management functions.

Which make Zigbee very easy to use. By connecting Zigbee to beaglebone, forming a IOT is relative easy.

We provide above tutorial for university programs.

A simple how to use zigbee + arduino for a temperature sensor neetwork is provided on google code:
https://code.google.com/p/kittybee/



Comments